top of page

FIAR SLEEVE

FIAR sleeve  : how to put on the sleeve

  1. Position the sleeve so that the large seam goes under the arm

  2. Roll the top of the sleeve to facilitate the insertion of the arm 

  3. Pass your hand over the sleeve and pull it up over the forearm until it refuses to go any higher

  4. Wrap the upper wrist bandage taking care to put 50% of the band on the end of the sleeve and the other 50% on the skin.

  5. Pull all the way through the wrap  

  6. Firmly attach the fastener to the Velcro for this purpose, to close. 

  7. Unroll the sleeve and insert the tips gently as you pass and position the fabric well at the top of the biceps.

  8. Wrap the top band taking care to put 50% of the bandage on the top of the sleeve and the other 50% on the skin. Make 2 turns by pulling and maintaining tension.

  9. Firmly attach the fastener to the Velcro for this purpose, to close. 

  10. Have a good shower!

How to remove the sleeve after showering

  1. Detach the wrist band

  2. Detach the band from the top of the sleeve

  3. Take the Top of the sleeve and pull it down as if you want to twist it upside down.

  4. This way, the wet exterior does not touch you. Your arm will stay completely dry. 

FIAR LEGGING

FIAR legging  : how to put on the legging

  1. Position the legging so that the large seam lines up from the middle of the foot to the top of the knee 

  2. Roll the top of the leggings to facilitate the insertion of the foot and leg. 

  3. Roll the foot and leggings up towards the calf until it refuses to go any higher

  4. Unroll the leg band to the top of the knee and position the fabric well at the top of the knee.

  5. Wrap the top band making sure to put 50% of the band on the top of the leggings and the other 50% on the skin. Make 2 turns by pulling and maintaining tension. 

  6. Firmly attach the fastener to the Velcro for this purpose, to close. 

How to remove the leg warmer after showering

  1. Detach the band from the top of the knee  

  2. Take the Top of the leg warmer and pull it down as if you want to turn it inside out.

  3. This way, the wet exterior does not touch you. Your leg will stay completely dry

FIAR MITT

FIAR MITT  : how to put on the mitten

  1. Gently insert your hand into the mitt.

  2. Pinch together the two small Velcro straps.

  3. Wrap the band around the wrist, taking care to put 50% of the band on the top of the mitt and the other 50% on the skin. Make 2 turns by pulling and maintaining tension. 

  4. Attach the strap firmly to the Velcro to close. 

  5. Enjoy your shower!

How to take off the mitt after showering:

  1. Detach the band from the top of the wrist

  2. Take the top of the mitten and roll it up, as if you want to turn it inside out.

  3. This way, the wet exterior does not touch you. Your hand will stay completely dry

COMFORT SLEEVE

Comfort sleeve: how to put on the sleeve

  1. It's very simple. It's like putting on a nylon stocking. 

  2. You position the seam towards the back of the arm.

  3. You pass your hand inside and you gently pull up the sleeve

  4. You take care to position your tips inside 

  5. You pull it up to the top of the biceps.

  6. Have a nice day...

How to remove the sleeve

  1. Detach the wrist band

  2. Detach the band from the top of the sleeve

  3. Take the Top of the sleeve and pull it down as if you want to twist it upside down . 

bottom of page